Headquarters · English
IPC certification and soldering training in Longmont, Colorado
Our first training center and still the busiest. Twelve benches, magnification at every station, and the workmanship samples used in class built from real production assemblies.
Visit us
701 Delaware Ave Unit B, Longmont CO 80501
- Phone
- (888) 837 9959
- Class hours
- 8am to 4pm MT
- Office
- Mon to Fri, 8am to 5pm
- Language
- English
Training scheduled in Longmont, CO
| Program | Certification | Dates | Status | Register |
|---|---|---|---|---|
| A-620 Space AddendumSpace addendum to IPC/WHMA-A-620 | CIS, CIT | Available | Register | |
| IPC 7711/7721 RECERTRecertification: rework, modification and repair | CIS, CIT, CSE | Available | Register | |
| IPC-A-610 RECERTRecertification: acceptability of electronic assemblies | CIS, CIT, CSE | Available | Register | |
| IPC J-STD-001 RECERTRecertification: soldered electrical assemblies | CIS, CIT, CSE | Available | Register | |
| IPC/WHMA-A-620 RECERTRecertification: cable and harness assemblies | CIS, CIT, CSE | Available | Register | |
| IPC-A-610Acceptability of electronic assemblies | CIS, CIT, CSE | Available | Register | |
| IPC 7711/7721Rework, modification and repair of electronic assemblies | CIS, CIT, CSE | Available | Register | |
| IPC J-STD-001Requirements for soldered electrical and electronic assemblies | CIS, CIT, CSE | Available | Register | |
| J-STD-001 Space AddendumSpace and military addendum to J-STD-001 | CIS, CIT | Available | Register | |
| Introduction to ESD and Component RecognitionBlackfox training | Operator level | Available | Register | |
| IPC/WHMA-A-620Cable and wire harness assemblies | CIS, CIT, CSE | Available | Register | |
| Customizable SolderingBlackfox training | Operator level | Available | Register | |
| A-620 Hands On Add OnIPC/WHMA-A-620 Hands-On | CIS, CIT | Available | Register | |
| IPC/WHMA-A-620 RECERTRecertification: cable and harness assemblies | CIS, CIT, CSE | Available | Register | |
| IPC-A-610 RECERTRecertification: acceptability of electronic assemblies | CIS, CIT, CSE | Available | Register | |
| IPC J-STD-001 RECERTRecertification: soldered electrical assemblies | CIS, CIT, CSE | Available | Register | |
| A-620 Space Addendum RECERTRecertification: space addendum to IPC/WHMA-A-620 | CIS, CIT | Available | Register | |
| IPC J-STD-001Requirements for soldered electrical and electronic assemblies | CIS, CIT, CSE | Available | Register | |
| IPC/WHMA-A-620Cable and wire harness assemblies | CIS, CIT, CSE | Available | Register | |
| J-STD-001 Space AddendumSpace and military addendum to J-STD-001 | CIS, CIT | Available | Register | |
| A-620 Space AddendumSpace addendum to IPC/WHMA-A-620 | CIS, CIT | Available | Register | |
| IPC 7711/7721 RECERTRecertification: rework, modification and repair | CIS, CIT, CSE | Available | Register | |
| IPC J-STD-001 RECERTRecertification: soldered electrical assemblies | CIS, CIT, CSE | Available | Register | |
| IPC/WHMA-A-620 RECERTRecertification: cable and harness assemblies | CIS, CIT, CSE | Available | Register | |
| Customizable SolderingBlackfox training | Operator level | Available | Register |
Training delivered at this center
Longmont runs the full IPC catalogue plus every Blackfox hands on program. It is also where instructor level courses are taught, because the bench capacity and the sample library are here.
- IPC/WHMA-A-620
- A-620 Space Addendum
- IPC 7711/7721 RECERT
- IPC-A-610 RECERT
- IPC J-STD-001 RECERT
- IPC/WHMA-A-620 RECERT
- IPC-A-610
- IPC 7711/7721
- IPC J-STD-001
- J-STD-001 Space Addendum
- Introduction to ESD and Component Recognition
- Customizable Soldering
- A-620 Hands On Add On
- A-620 Space Addendum RECERT
The facility
Twelve soldering stations with fume extraction, stereo microscopes at every bench, and a sample library of accepted and rejected assemblies collected over three decades of teaching.
Getting here
- Denver International Airport is 45 miles, about one hour by car
- Free parking on site, enter from Delaware Ave
- Hotels within two miles, we can send the list we usually recommend
- Class starts at 8am Mountain Time, please arrive fifteen minutes early on day one
- Lunch is one hour, several options within walking distance
- Safety shoes are not required, this is a training center not a production floor
Coming to Longmont, CO
Is there parking at the center?
Yes, free parking on site with the entrance on Delaware Ave. Larger vehicles can use the lot at the rear of the building.
What time does class start and finish?
Class runs 8am to 4pm Mountain Time with an hour for lunch. Day one starts with a short administration session, so arrive by 7:45am.
Which hotels do you recommend?
There are several within two miles of the center. We send a list with the enrollment confirmation, including the ones that hold a corporate rate for our students.
Can we tour the facility before booking a team session?
Yes. Tell us roughly when you are in the area and we will arrange a walk through with the instructor who would teach your team.
Send a message
Ask this location a question
It reaches the desk that handles it, and a reply comes back during business hours.