Guides to the training, the certification levels, and what the work is actually like on the floor. Free to read, no form in the way.
7 guides and articles
In aerospace, the reliability of cable and wire harness assemblies can be the difference between mission success and failure. The IPC/WHMA-A-620 Space Addendum addresses this critical need, guiding manufacturers in achieving high standards. If you’re searching online for “ipc…
Read the guide
If you are involved in cable and wire harness assemblies, you know how important it is to follow the IPC WHMA A 620 standard. This standard, developed by IPC and the Wire Harness Manufacturers Association (WHMA), defines the requirements and acceptance criteria for cable and…
Read the guide
When it comes to getting an IPC certification in the electronics manufacturing industry, this doesn’t only involve the training, qualifying examination, and licensure for a single program. For example, the IPC WHMA A 620 certification covers the industry-accepted requirements…
Read the guide
The IPC 620 Space Addendum, or more commonly referred to as the IPC/WHMA-A-620 Space Addendum, provides the industry-accepted standards for the fabrication and installation of wire and cable harness assemblies that are utilized for getting to space and for operating in such…
Read the guide
A universally recognized standard in workmanship for the wire harness industry didn’t exist until the IPC-WHMA-A-620 was developed. Thus, before the IPC 620, cable and wire harness manufacturers didn’t have a baseline for a finished product with acceptable quality……
Read the guide
The IPC/WHMA-A-620 is a quality standard that describes the Requirements and Acceptance for Cable/Wire Harness Assemblies. It was created as a joint project of the Association Connecting Electronics Industries (IPC) and the Wire and Harness Manufacturers Association (WHMA).…
Read the guide
The IPC/WHMA-A-620 is a training and certification granted by the Institute of Printed Circuits/Wire Harness Manufacturers Association. It describes the criteria for acceptability for crimped, mechanically secured, and soldered interconnection and the corresponding restraining /…
Read the guide
Standards guides
Newsletter
One email a month at most, covering revision changes, compliance requirements and dates opening for enrollment.
Next step
Tell us the team and the timing, and we will come back with dates and a quote.
Request a quote